Odd Behavior During Osc/Filter Calibration

The Sequential Prophet-6 Analogue Synthesizer

Moderator: Pym

Post Reply
User avatar
DJKeys
Posts: 24
Joined: Tue Jul 07, 2015 11:45 pm

Odd Behavior During Osc/Filter Calibration

Post by DJKeys » Wed Jul 08, 2015 4:13 pm

This happened once before and once after the upgrade to OS 1.1:

Usually, the calibration takes a minute or so and then the display reads DoN and it goes back to the Preset mode.

The last two times I performed it, the process gets stuck in a loop, going L1-L2-L3.....L6 and then repeats. It does this continuously until I power off the unit. Then it seems to be fine. This just started happening.

I opened a ticket with Support as well.

Thanks!

-dj
Prophet 6
Access Virus TI2 Polar
Nord Stage 2
Korg Wavestation A/D
Korg TR Rack
Roland XV-5050

rygrob
Posts: 1
Joined: Sun Aug 07, 2016 10:22 pm

Re: Odd Behavior During Osc/Filter Calibration

Post by rygrob » Sun Aug 07, 2016 10:31 pm

Hi I am having this same problem with a new Prophet-6 os 1.3.1. Everything worked fine the first time, but running the calibration again a few days later, it gets stuck in this cycle. Just emailed support, but since it's Sunday, I thought I'd see if I could get a reply here. Thanks.

wetfood
Posts: 1
Joined: Thu Sep 08, 2016 4:03 am

Re: Odd Behavior During Osc/Filter Calibration

Post by wetfood » Thu Sep 08, 2016 4:07 am

This is happening with me as well. I do microtonal work and calibrate fairly often. Calibrations worked fine for months after the update, but suddenly it gets hung up at L5. What's going on?

Post Reply