The Dave Smith Instruments Pro 2 Analogue Synthesizer
6 posts • Page 1 of 1
I setup all of my keys with a yoke-style pitch wheel. I usually accomplish this by calibrating the wheel in the preferred direction but the Pro 2 pitch wheel looses functionality when I try to calibrate it in the opposite direction as the factory setting. Am I missing something?
This works. Just tried it.BobTheDog wrote:I guess the only way is to calibrate normally.
Set pitch bend amounts to 'off'.
Use the mod matrix to send pitch bend to Osc All Freq.
I haven;t tried this but it might be worth a try.
Set both up and down pitch bend ranges to Off. In the mod matrix set Source = Pitchbend, Amount = -127, Destination = Osc All Freq.
Actually, a value of -127 gives a full 16 semitones of pitchbend in both directions. 1 semitone is a value of 8 so to get a reversed pitchbend of an octave, for example, would require a value of -96.
Prophet'08 PE #3591 | Tetr4 #2088 | MEK PE #1180 | Jupiter 6 | Juno 60 | Moog Sub Phatty | MS-20 mini | random digital stuff